Somero FAQ Forum

PowerRake 2.0 keeps losing Hydraulic & electrical power

Joystick Swap?

How do I tell the difference between the 6 liter SLS valve and the 12 liter Elevation valves?

Is there a difference between the sidelock functionality on the CopperHead XD2.0 and XD3.0?

Is there a wiring diagram for the SXP RSI interface with the auto/man switches?

Where can I find a schematic showing the SXP boom cord routing?

How can I rotate the rings of the electric swivel.

I have a faulty switch on my Copperhead or PowerRake. Which of the switches included with the spare parts kit should I use to replace it?

How can I check to see if the charging system on a PowerRake or CopperHead is working properly?

The GCR laser receivers on my Copperhead quit working when the deadman lever is held down. What could cause this to happen?

How do I make sure the circuit breaker on my CopperHead Ops Box is fully reset?

What does the 9 volt battery in the system 2 self level (SLS) control box do?

What would cause there to be no electrical power to the control console on my Copperhead but I can manually start the engine?

Do the different Sonic Tracers on your equipment interchange between different equipment? Do the ST2-20(ST20), ST21, and ST2-25(ST25) interchange?

What is a viable work-around if the shut-off solenoid fails on the Cummins engine?

When attempting to start the SXP Laser Screed, the lights and gauges are coming on, but the engine won't crank. What might be cause this to occur?

For 3DPA, what might cause the plow to rotate fully up? What wiring modification needs to be made inside the System 2 Control Box?

What can I do to make the propel and rotate functions smoother on my SXP? What do I do to stop my machine rotation from being so jerky?

Why are my propulsion and rotation driver cards reading a value when the joystick is in neutral?

What are the differences between the neutral start relay and the main power relay?