Home > PRODUCTS > Laser Screed® > S-240 Laser Screed*

S-240 Laser Screed*

*In 2004 this machine was replaced by the all-new SXP Laser Screed.

Ace/Avant Concrete Construction Company started with one Somero S-240 Laser Screed in 1992. Today they own and operate 4 Laser Screeds and are recognized leaders for producing concrete flatwork in their region. "The S-240 Laser Screed has been an integral part of our company's growth and reputation," states Scott Niemitalo. "We have been able to construct floors to the highest degree of quality in regards to flatness, levelness, finish and overall owner satisfaction."

Increased Productivity

The Somero S-240 Laser Screed features a 12-foot wide screeding head mounted on a powerful 20-foot telescopic boom. This results in 240 square feet of consolidated, laser-level concrete in less than one minute. Add to this the fact that you can take advantage of wide placement when using a Laser Screed, eliminating most formwork, and true fast-track production becomes a reality.

Improved Quality

"The Somero Laser Screed is essential for meeting the demands for flatter floors in today's industrial facilities," says Scott Niemitalo. Ace/Avant even uses the S-240 Laser Screed on it's superflat floor projects, helping them to achieve incredible flatness and levelness numbers.

Concrete Paving

The S-240 Laser Screed can easily place concrete over contoured surfaces when you add the Somero 3-D Profiler System. Now you can expand your Services to include paving parking lots, roadways, and runways. Concrete paving and white topping is a growing, multi-billion dollar market.

Reliable Engine
The Somero Laser Screed is powered by an extremely reliable diesel engine that provides 50+ HP. The engine compartment is easily accessible for routine maintenance.

Storage Compartment
The Somero Laser Screed features plenty of lockable storage compartments for tools and equipment needed on the job. The main storage boxes are located on the sides of the machine.

Laser Control System
The console mounted computer maintains grade with laser precision and monitors the screed elevation at a rate of 10 times per second. Light indicators provide continual overview of automatic control.

S-240 Specifications

Overall Width 7'-8" Outside of Tires (2.34 m)
14'-1" at Screed Head (4.29 m)
Overall Length 18'-3" Boom In (5.56 m)
36'-1" Boom Out (11.0 m)
28'-5" Transport (8.66 m)
Overall Height 8'-3" (2.51 m)
Weight (nominal) 15,100 lbs. (6850 kg)
Boom Reach 20 ft. (6.1 m)
Screed Width 12 ft. (3.66 m)
Screed Area Per Pass 240 sq. ft. (22.3 m2)
Fuel Capacity 27 gallons (102 l)
Hydraulic Oil Capacity 27 gallons (102 l)
Upper Frame Rotation 360 degrees
Vehicle Stabilizers 4 hydraulically-operated stabilizer pads
Drive Train Hydraulic-powered four wheel drive
Axles - Two Drive Steer Type
Operating Modes 2 Wheel, 4 Wheel, Crab Steer
Tires/Wheels 35" 12 ply / 16" rims
Maximum Speed 3.6 MPH (5.8 kpH)
Engine Type 4 Cyl., 4 stroke, direct-injection, liquid cooled diesel 199 cu. in. (3.26 l)
Horse Power 65 HP @ 2600 rpm (48.5 kW)
Miscellaneous Features 12 volt, key on & off, cold start aid, hand-actuated throttle with electric shutoff
Laser Type 2 independently mounted laser receivers with on-board computer control panel. Continuous elevation monitoring at a rate of 10 times per second.
Screed Type Hydraulic powered laser controlled screeding head mounted on a telescopic boom. Self-leveling screed head consists of a plow that removes excess concrete, an auger that cuts concrete to grade, and a vibrator that consolidates material at 3000 VPM.

 

The S-240 Basic Package

  • Rugged and proven Trimble laser control system
    GL722-IR Dual Slope Transmitter with Quick Disconnect and Adaptor
    (For more information, visit Trimble's web site at www.trimble.com/gl700.html)
  • GCS21 Laser Control System
  • Flow on demand hydraulic system for decreased fuel usage, decreased pump wear and increased engine life
  • Sound insulation to lower engine noise
  • Heavy-duty drive axles
  • Spare Tire
  • Wheel Covers
  • Integral High Pressure Washer
  • Tough urethane paint
  • Heavy wall hydraulic cylinders
  • Two large storage boxes for tools and accessories
  • Supplementary tools, equipment and spare parts
  • Classroom training for your operators

Options

3-D Profiler System

The Somero 3-D Profiler System adds complete 3-D paving capability to your S-240 Laser Screed for parking lots, driveways, airport taxiways, loading docks, and more. Comes complete with all necessary system components and hard shelled cases for storage and transport.

Spare Tire (On Rim) 35 x 16.1 High Flotation

Upgrade from mini-spare to full size tire

Tire Filling

Tires can be filled with either a liquid sealant or a polyurethane material. The liquid sealant makes the tires self-sealing after receiving punctures of up to 1/4" in diameter. The polyurethane makes the tires essentially "flat -proof."

High Flotation Stabilizer Pad Kits

Available in 20" or 24". These oversize pads provide improved support on soft subgrades as well as lower the load ratings where there are compaction concerns. Each kit includes four pads and all necessary mounting hardware.

Field Support Kit

This kit has the critical spares you need to insure continuous operation packaged in a convenient case. The kit includes: valve cartridges, hydraulic pump, Laser Transmitter, Auger Motor, Vibrator Motor, vibrator mechanical wear items

Website Design by InHaus Media