S-15R Oasis Class

S-15R Oasis “Basics” –  This is for NEW operators, who’ve never screeded or used our equipment before; or operators changing control systems ( i.e. – they’ve run only PA or GCS controls, now going to Oasis controls)                                     […]

OASIS (S22E) Class

S-22E Oasis “Basics” –  This is for NEW operators, who’ve never screeded or used our equipment before; or operators changing control systems ( i.e. – they’ve run only PA or GCS controls, now going to Oasis controls)  Course # SCI-10001   This class is now full. We are no longer accepting registrations.

AOTs (Advanced Operator) S22E Class

AOTs (Advanced Operators Training) S-22E - This is for EXPERIENCED operators only. Must attend a "Basics" course as prerequisite or show prior training from Somero.   When changing from different "control systems", we recommend attendance of the "Basics" class first . Course # SCI-20001

3-D Class

3D & SiteShape Version 14+ “with Panasonic Toughbook” - This is for NEW operators or Existing operators with older/previous 3D systems. Please note: Software version makes a huge difference. Make sure you’re attending the correct class. Course # SCI-30001 for 3D, Course # SCI-40001 for Site Shape   This class is now full. We are […]

S-15R Oasis Class

S-15R Oasis “Basics” –  This is for NEW operators, who’ve never screeded or used our equipment before; or operators changing control systems ( i.e. – they’ve run only PA or GCS controls, now going to Oasis controls) Course # SCI-10002                                                                                                                                                          

3-D Class

3D & SiteShape Version 14+ “with Panasonic Toughbook” - This is for NEW operators or Existing operators with older/previous 3D systems. Please note: Software version makes a huge difference. Make sure you’re attending the correct class. Course # SCI-30001 for 3D, Course # SCI-40001 for Site Shape   This class is now full. We are […]

Mechanics Class

Mechanics S-22E – This is for Mechanics, Owner/Operators, and Operators that need to work and maintain their equipment. We recommend taking the “Basics” first, but is not a prerequisite. Course # SCI-50001

3-D Class

3D & SiteShape Version 14+ “with Panasonic Toughbook” - This is for NEW operators or Existing operators with older/previous 3D systems. Please note: Software version makes a huge difference. Make sure you’re attending the correct class. Course # SCI-30001 for 3D, Course # SCI-40001 for Site Shape   This class is now full, we are […]